Support Contact Us Legalese News & Newsletter Shop Online
2

SX Series

SX-4A_0
The SX-4A is compact, yet powerful. This two-way active nearfield monitor sports a 4.5” woofer with a 1” tweeter. Its input connectors are unbalanced RCA. MDF cabinet with bass reflex port design.


SX-4A Features:

  • Compact but powerful with very precise sound reproduction
  • Active two-way monitor system with active cross over design
  • Extended bass reflex type
  • 4.5” NRSC paper cone and CU-cap on pole piece
  • 1” silk dome tweeter with neodymium magnet, plus heat sink and
    ferrofluid cooling provide smooth and sweet high frequency response.
  • Bi-amped: 25W (LF), 15W(HF) for individual monitor
  • Unbalanced RCA input connector
  • “Bass Boost” switch equipped
  • MDF cabinet with extended bass reflex port design, ideal for recording and
    multi-media applications.
  • Connections:
    • Unbalanced RCA input connector
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 65 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 70 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 4.5″ NRSC paper cone
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 4.0 kHz
Cross over slope 12 dB/oct (LP and HP)
Input level for 86dB SPL @ 500-2000 Hz avg @ 1 m -17 dBu RMS @ 0 dB level setting
Input connectors Balanced 6.35mm TRS connectors
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 40W (per unit)
Amplifier power Tweeter: 15W / Woofer: 25W
Internal cabinet volume 4.0 liters
Weight Main Cabinet:5.6 kg (12.3lbs)
Sub-Cabinet:3.8 kg (8.4lbs)
Dimensions 147 x 251 x 260 mm
5.8“ x 9.8”x 10.3”


SX-5A-3D
The SX-5A is an active studio monitor system gives smooth response that’s accurate & pleasant to listen to. Compact & powerful with a 5.5” copolymer butyl surround woofer and smooth high freq. 1” silk dome tweeter. Bi-amped power module with active crossover. XLR balanced and RCA unbalanced inputs, the “Vasorb” monitor rubber feet are included in this sweet sounding monitor.


SX-5A Features:

  • Two-way active studio reference monitor with ported tuned enclosure providing extremely accurate monitoring for
    recording studio, post-production and multi-media applications.
  • Compact and powerful with very precise sound reproduction.
  • 1”silk dome tweeter with neodymium magnet, plus heat sink and ferrofluid cooling provide smooth and sweet high
    frequency response.
  • 5.5” copolymer butyl surround woofer provides tight and controlled low frequency response.
  • Build-in Bi-Amp power module for low and high frequency drivers HF: 30W / LF: 60W
  • Active crossover uses a multi-pole design for linear response from bottom to top.
  • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • A/V shielded for multimedia applications providing clean operation near computer CRT monitors.
  • Solid MDF construction
  • Vasorb TM monitor rubber feet included
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 45 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 45 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 5.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.7 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 85dB SPL @ 500-2000 Hz avg @ 1 m -14 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR connector
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 90W (per unit)
Amplifier power Tweeter: 30W / Woofer: 60W
Internal cabinet volume 8.0 liters
Weight 6.5 kg (14.3lbs)
Dimensions 180 x 300 x 275 mm
7.1“ x 11.8”x 10.8”


SX-6A-Front
The SX-6A is an active studio monitor system gives smooth response that’s accurate & pleasant to listen to. Compact & powerful with a 6.5” copolymer butyl surround woofer and smooth high freq. 1” silk dome tweeter. Bi-amped power module with active crossover. XLR balanced and RCA unbalanced inputs, the “Vasorb” monitor rubber feet are included in this sweet sounding monitor.


SX-6A Features:

  • Compact and powerful with very precise sound reproduction.
  • Two-way active studio reference monitor with ported tuned enclosure providing extremely accurate monitoring for
    recording studio, post-production and multi-media applications.
  • 1”silk dome tweeter with neodymium magnet, plus heat sink and ferrofluid cooling provide smooth and sweet high frequency response.
  • 6.5” copolymer butyl surround woofer provides tight and controlled low frequency response.
  • Build-in Bi-Amp power module for low and high frequency drivers
    HF: 40W / LF: 80W
  • Active crossover uses a multi-pole design for linear response from bottom to top.
  • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • A/V shielded for multimedia applications providing clean operation near computer CRT monitors.
  • Solid MDF construction
  • Vasorb TM monitor rubber feet included
  • Connections:
    • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 40 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 40 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 6.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.6 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 85dB SPL @ 500-2000 Hz avg @ 1 m -15 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR connector
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 120W (per unit)
Amplifier power Tweeter: 40W / Woofer: 80W
Internal cabinet volume 12.0 liters
Weight 10.0 kg (22.0lbs)
Dimensions (WxHxD) 210 x 320 x 340 mm
8.2“ x 12.6”x 13.4”


SX-8A-3D_0
The SX-8A is an active studio monitor system gives smooth response that’s accurate & pleasant to listen to. Compact & powerful with a 8.0” copolymer butyl surround woofer and smooth high freq. 1” silk dome tweeter. Bi-amped power module with active crossover. XLR balanced and RCA unbalanced inputs, the “Vasorb” monitor rubber feet are included in this sweet sounding monitor.


SX-8A Features:

  • Two-way active studio reference monitor with ported tuned enclosure providing extremely accurate monitoring for
    recording studio, post-production and multi-media applications.
  • Compact and powerful with very precise sound reproduction.
  • 1”silk dome tweeter with neodymium magnet, plus heat sink and ferrofluid cooling provide smooth and sweet high
    frequency response.
  • 8” copolymer butyl surround woofer provides tight and controlled low frequency response.
  • Build-in Bi-Amp power module for low and high frequency drivers
    HF: 60W / LF: 120W
  • Active crossover uses a multi-pole design for linear response from bottom to top.
  • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • A/V shielded for multimedia applications providing clean operation near computer CRT monitors.
  • Solid MDF construction
  • Vasorb TM monitor rubber feet included
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 35 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 35 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 8.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.5 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 85dB SPL @ 500-2000 Hz avg @ 1 m -15 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR connector
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 180W
Amplifier power Tweeter: 60W / Woofer: 120W
Internal cabinet volume 18.0 liters
Weight 13.0 kg (28.6lbs)
Dimensions (WxHxD) 250 x 370 x 340 mm
9.8“ x 14.6”x 13.4”


SX-Sub8A-3D
The SX-Sub8A is an active bass reflex sub with 8” long throw woofer. Balanced XLR connectors, it has level controls and crossover freq. range control. Amp module is rated @ 150W @ 8ohms. This sub is ideal for studio or professional use. Weighs in at only 37.5 lbs.


SX-Sub8A Features:

  • 8” long throw, paper cone woofer
  • Phase adjustment in 0° / 180°
  • 29-200 Hz precise low-frequency reproduction
  • Balanced XLR outputs
  • Subwoofer level control
  • Adjustment of Crossover frequency ranges
  • Low frequency extension adjustment
  • Build-in 150 W @ 8 Ohms amp module
  • Ideal subwoofer system for studio & professional applications
  • Connections:
    • Balanced XLR outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


Bass principle Bass reflex
Frequency reponse 30Hz to 150Hz
Inputs LFE/Slave: Balanced XLR connector
SAT/SUB:Right/Left full bandwidth, XLR
Input Impedance + branch: 20K Ohm
– branch: 10K Ohm
Sensitivity 75mV to 5V , adjustable
Max. input voltage 8 V
Outputs Slave: XLR connector
SAT/SUB:Right/Left, Highpass filtered, XLR & RCA
Output impedance 100 Ohm (each branch)
XLR Connector Pin 1: 0 / Pin 2 : + / Pin 3 : –
Mode selector LFE & Slave
Phase adjustment 0 / 180
High pass Flat / 60Hz / 80Hz
Low pass 50 Hz to 150 Hz
Power modes On / Auto
Amplifier power 120W, 4 Ohm
Woofer Cone:204mm / 8″, long throw, paper cone
Coil: 35mm / 1.4″ voice coil
Cabinet volume 22 liters
Power Consumption Standby: <5W Max:250W Weight 17 Kg (37.5lbs) Dimensions 310 x 290x 360 mm 10.2” x 9.6” x 11.9” Main 120V, 50/60Hz 220V, 50/60Hz