Support Contact Us Legalese News & Newsletter Shop Online
2

Monitors

PX-Series Monitors

PX-Sub10A-3D
The PX-Sub10A – Active subwoofer with 10” long throw paper cone woofer. Balanced  XLR outputs, this sub has level control and is powered by 200W @8ohms amp module. Ideal for studio & professional applications.


PX-Sub10A Features:

  • 10” long throw, paper cone woofer
  • Phase adjustment in 0° / 180°
  • 29-200 Hz precise low-frequency reproduction
  • Balanced XLR outputs
  • Subwoofer level control
  • Adjustment of Crossover frequency ranges
  • Low frequency extension adjustment
  • Build-in 200 W @ 8 Ohms amp module
  • Ideal subwoofer system for studio & professional applications
  • Connections:
    • XLR outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Active subwoofer
Bass principle Bass reflex
Frequency reponse 30Hz to 200Hz
Inputs LFE/Slave: Balanced XLR connector
SAT/SUB:Right/Left full bandwidth, XLR
Input Impedance + branch: 20K Ohm
– branch: 10K Ohm
Sensitivity 75mV to 5V , adjustable
Max. input voltage 8 V
Outputs Slave: XLR connector
SAT/SUB:Right/Left, Highpass filtered, XLR & RCA
Output impedance 100 Ohm (each branch)
XLR Connector Pin 1: 0 / Pin 2 : + / Pin 3 : –
Mode selector LFE & Slave
Phase adjustment 0 / 180
High pass Flat / 60Hz / 80Hz
Low pass 50 Hz to 150 Hz
Power modes On / Auto
Amplifier power 120W, 4 Ohm
Woofer Cone:256mm / 10.0″, long throw, paper cone
Coil: 50mm / 2.0″ voice coil
Cabinet volume 29 liters
Power Consumption Standby: <5W Max:300W Weight 20 Kg (44.1lbs) Dimensions 360 x 330 x 450 mm 14.2” x 13.0” x 16.3” Main 120V, 50/60Hz 220V, 50/60Hz


PX-Sub350A
The PX-Sub350A – 350 watt low-frequency amplifier
– 29-200Hz precise low-frequency reproduction
– 10″ low-frequency driver with rubber surround
– Balanced XLR and unbalanced outputs
– Ideal subwoofer cabinet for professional applications


PX-Sub350A Features:

  • 350 watt low-frequency amplifier
  • 29-200Hz precise low-frequency reproduction
  • 10″ low-frequency driver with rubber surround
  • Balanced XLR and unbalanced outputs
  • Ideal subwoofer cabinet for professional applications
  • Connections:
    • Balanced XLR and unbalanced outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.

PXT8A-FRONT
The PX-T8A G2 – Compact high performance active studio monitor
– R-Type Transformer for super clean output
– Active 2-Way Monitor System with complex Active Crossover design
– High, Mid and Low range contour control
– High-Pass Filter – Flat, 60Hz & 80Hz selectable
– The ideal solution for near-field monitoring in any recording or broadcasting facility
– Designed for use in stereo as well as multichannel setups
– Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
– ICON’s “Vasorb TM” monitor stands are  included


PX-T8A2 Features:

  • Build-in Bi-Amp power module: 100W (LF), 30W(HF)
  • ICON 8″ polypropylene with paper dustcap
  • Low loss SBR surround with low creep and long time reliability
  • Progressive spider to achieve soft clipping and low distortion even under extreme load
  • Dual magnet ferrite magnet system with extended height for superb bass reproduction
  • Aluminum short circuiting ring
  • Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
  • High-end 1″ dome tweeter
  • Soft fabric dome and surround with wide-dispersion optimized geometry
  • Big surround to reduce distortion
  • Low loss ferrofluid-free magnet system for open and detailed sound
  • Diffraction optimized smooth front baffle design
  • Extended front baffle dimensions to eliminate any vibration or sound radiation from the enclosure
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 35 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 35 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 8.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.0 kHz
Cross over slope 18 dB/oct (LP and HP)
Input level for 86dB SPL @ 500-2000 Hz avg @ 1 m -15 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR/6.35mm TRS connectors
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 130W
Amplifier power Tweeter: 30W / Woofer: 100W
Internal cabinet volume 22.0 liters
Weight 14.0 kg (30.8lbs)
Dimensions (WxHxD) 255 x 415 x 348 mm
10.0“ x 16.3”x 13.7”


SX-Series Monitors

SX-4A_0
The SX-4A is compact, yet powerful. This two-way active nearfield monitor sports a 4.5” woofer with a 1” tweeter. Its input connectors are unbalanced RCA. MDF cabinet with bass reflex port design.


SX-4A Features:

  • Compact but powerful with very precise sound reproduction
  • Active two-way monitor system with active cross over design
  • Extended bass reflex type
  • 4.5” NRSC paper cone and CU-cap on pole piece
  • 1” silk dome tweeter with neodymium magnet, plus heat sink and
    ferrofluid cooling provide smooth and sweet high frequency response.
  • Bi-amped: 25W (LF), 15W(HF) for individual monitor
  • Unbalanced RCA input connector
  • “Bass Boost” switch equipped
  • MDF cabinet with extended bass reflex port design, ideal for recording and
    multi-media applications.
  • Connections:
    • Unbalanced RCA input connector
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 65 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 70 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 4.5″ NRSC paper cone
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 4.0 kHz
Cross over slope 12 dB/oct (LP and HP)
Input level for 86dB SPL @ 500-2000 Hz avg @ 1 m -17 dBu RMS @ 0 dB level setting
Input connectors Balanced 6.35mm TRS connectors
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 40W (per unit)
Amplifier power Tweeter: 15W / Woofer: 25W
Internal cabinet volume 4.0 liters
Weight Main Cabinet:5.6 kg (12.3lbs)
Sub-Cabinet:3.8 kg (8.4lbs)
Dimensions 147 x 251 x 260 mm
5.8“ x 9.8”x 10.3”


SX-5A-3D
The SX-5A is an active studio monitor system gives smooth response that’s accurate & pleasant to listen to. Compact & powerful with a 5.5” copolymer butyl surround woofer and smooth high freq. 1” silk dome tweeter. Bi-amped power module with active crossover. XLR balanced and RCA unbalanced inputs, the “Vasorb” monitor rubber feet are included in this sweet sounding monitor.


SX-5A Features:

  • Two-way active studio reference monitor with ported tuned enclosure providing extremely accurate monitoring for
    recording studio, post-production and multi-media applications.
  • Compact and powerful with very precise sound reproduction.
  • 1”silk dome tweeter with neodymium magnet, plus heat sink and ferrofluid cooling provide smooth and sweet high
    frequency response.
  • 5.5” copolymer butyl surround woofer provides tight and controlled low frequency response.
  • Build-in Bi-Amp power module for low and high frequency drivers HF: 30W / LF: 60W
  • Active crossover uses a multi-pole design for linear response from bottom to top.
  • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • A/V shielded for multimedia applications providing clean operation near computer CRT monitors.
  • Solid MDF construction
  • Vasorb TM monitor rubber feet included
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 45 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 45 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 5.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.7 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 85dB SPL @ 500-2000 Hz avg @ 1 m -14 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR connector
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 90W (per unit)
Amplifier power Tweeter: 30W / Woofer: 60W
Internal cabinet volume 8.0 liters
Weight 6.5 kg (14.3lbs)
Dimensions 180 x 300 x 275 mm
7.1“ x 11.8”x 10.8”


SX-6A-Front
The SX-6A is an active studio monitor system gives smooth response that’s accurate & pleasant to listen to. Compact & powerful with a 6.5” copolymer butyl surround woofer and smooth high freq. 1” silk dome tweeter. Bi-amped power module with active crossover. XLR balanced and RCA unbalanced inputs, the “Vasorb” monitor rubber feet are included in this sweet sounding monitor.


SX-6A Features:

  • Compact and powerful with very precise sound reproduction.
  • Two-way active studio reference monitor with ported tuned enclosure providing extremely accurate monitoring for
    recording studio, post-production and multi-media applications.
  • 1”silk dome tweeter with neodymium magnet, plus heat sink and ferrofluid cooling provide smooth and sweet high frequency response.
  • 6.5” copolymer butyl surround woofer provides tight and controlled low frequency response.
  • Build-in Bi-Amp power module for low and high frequency drivers
    HF: 40W / LF: 80W
  • Active crossover uses a multi-pole design for linear response from bottom to top.
  • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • A/V shielded for multimedia applications providing clean operation near computer CRT monitors.
  • Solid MDF construction
  • Vasorb TM monitor rubber feet included
  • Connections:
    • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 40 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 40 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 6.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.6 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 85dB SPL @ 500-2000 Hz avg @ 1 m -15 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR connector
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 120W (per unit)
Amplifier power Tweeter: 40W / Woofer: 80W
Internal cabinet volume 12.0 liters
Weight 10.0 kg (22.0lbs)
Dimensions (WxHxD) 210 x 320 x 340 mm
8.2“ x 12.6”x 13.4”


SX-8A-3D_0
The SX-8A is an active studio monitor system gives smooth response that’s accurate & pleasant to listen to. Compact & powerful with a 8.0” copolymer butyl surround woofer and smooth high freq. 1” silk dome tweeter. Bi-amped power module with active crossover. XLR balanced and RCA unbalanced inputs, the “Vasorb” monitor rubber feet are included in this sweet sounding monitor.


SX-8A Features:

  • Two-way active studio reference monitor with ported tuned enclosure providing extremely accurate monitoring for
    recording studio, post-production and multi-media applications.
  • Compact and powerful with very precise sound reproduction.
  • 1”silk dome tweeter with neodymium magnet, plus heat sink and ferrofluid cooling provide smooth and sweet high
    frequency response.
  • 8” copolymer butyl surround woofer provides tight and controlled low frequency response.
  • Build-in Bi-Amp power module for low and high frequency drivers
    HF: 60W / LF: 120W
  • Active crossover uses a multi-pole design for linear response from bottom to top.
  • XLR balanced input as well as unbalanced RCA input make connecting to most -10 dBV or +4dB signal source quick and easy.
  • A/V shielded for multimedia applications providing clean operation near computer CRT monitors.
  • Solid MDF construction
  • Vasorb TM monitor rubber feet included
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 35 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 35 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 8.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.5 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 85dB SPL @ 500-2000 Hz avg @ 1 m -15 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR connector
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 180W
Amplifier power Tweeter: 60W / Woofer: 120W
Internal cabinet volume 18.0 liters
Weight 13.0 kg (28.6lbs)
Dimensions (WxHxD) 250 x 370 x 340 mm
9.8“ x 14.6”x 13.4”


SX-Sub8A-3D
The SX-Sub8A is an active bass reflex sub with 8” long throw woofer. Balanced XLR connectors, it has level controls and crossover freq. range control. Amp module is rated @ 150W @ 8ohms. This sub is ideal for studio or professional use. Weighs in at only 37.5 lbs.


SX-Sub8A Features:

  • 8” long throw, paper cone woofer
  • Phase adjustment in 0° / 180°
  • 29-200 Hz precise low-frequency reproduction
  • Balanced XLR outputs
  • Subwoofer level control
  • Adjustment of Crossover frequency ranges
  • Low frequency extension adjustment
  • Build-in 150 W @ 8 Ohms amp module
  • Ideal subwoofer system for studio & professional applications
  • Connections:
    • Balanced XLR outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


Bass principle Bass reflex
Frequency reponse 30Hz to 150Hz
Inputs LFE/Slave: Balanced XLR connector
SAT/SUB:Right/Left full bandwidth, XLR
Input Impedance + branch: 20K Ohm
– branch: 10K Ohm
Sensitivity 75mV to 5V , adjustable
Max. input voltage 8 V
Outputs Slave: XLR connector
SAT/SUB:Right/Left, Highpass filtered, XLR & RCA
Output impedance 100 Ohm (each branch)
XLR Connector Pin 1: 0 / Pin 2 : + / Pin 3 : –
Mode selector LFE & Slave
Phase adjustment 0 / 180
High pass Flat / 60Hz / 80Hz
Low pass 50 Hz to 150 Hz
Power modes On / Auto
Amplifier power 120W, 4 Ohm
Woofer Cone:204mm / 8″, long throw, paper cone
Coil: 35mm / 1.4″ voice coil
Cabinet volume 22 liters
Power Consumption Standby: <5W Max:250W Weight 17 Kg (37.5lbs) Dimensions 310 x 290x 360 mm 10.2” x 9.6” x 11.9” Main 120V, 50/60Hz 220V, 50/60Hz


DT-Series Monitors

DT5Afront
The DT-5A monitor is a 5″ Active 2 way monitor w/ Active Crossover design (Per Unit)


DT-5A Features:

  • Active 2-Way Monitor System with complex Active Crossover design
  • The ideal solution for near-field monitoring in any recording or broadcasting facility
  • Designed for use in stereo as well as multichannel setups
  • Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
  • High, Mid and Low range contour control
  • High-Pass Filter – Flat, 60Hz & 80Hz selectable
  • Bi-Amped: 80W (LF), 40W(HF)
  • R-Type Transformer for super clean output
  • ICON Custom designed 5.5” woofer
  • Nomex® reinforced paper cone for crisp, clean and very open reproduction
  • Low loss SBR surround with low creep and long time reliability
  • Progressive spider to achieve soft clipping and low distortion even under extreme load
  • Heavy dual magnet ferrite magnet system with extended height for superb bass reproduction
  • Aluminum short circuiting ring and cupper cap in magnet system that practically eliminates motor distortion
  • Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
  • High-end 1” dome tweeter
  • Soft fabric dome and surround with wide-dispersion optimized geometry
  • Big surround to reduce distortion
  • Low loss ferrofluid-free magnet system for open and detailed sound
  • Heavy ferrite under hung dual magnet system for high sensitivity and low distortion
  • Extended and air-flow optimized back cavity to ensure low compression and low resonance frequency%2
  • Connections:
    • XLR Outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 45 Hz – 25 kHz
Max SPL 2 m, pair in listening room (IEC Short Term) 110 dB peak
Bass Principle Bass reflex
Tuning Frequency 50 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 5.25″ Nomex paper cone
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.8 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 100dB SPL @ 500-2000 Hz avg @ 1 m 0 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR
LCD Graphic type, white backlit
User settings (on the rear panel)
Power 2 pos switch (On/Off)
Input sensitivity 20 pos encoder (0 dB to mute)
High Pass Control Digital switch (Flat / 60 Hz / 80 Hz)
Bass control Digital switch (-2 dB / 0 dB / +2 dB)
Midrange control Digital switch (-2 dB / 0 dB / +2 dB)
Treble control Digital switch (-2 dB / 0 dB / +2 dB)

Power consumption Idle: 10W / Max: 90W (per unit)
Amplifier power Tweeter: 30W / Woofer: 60W
Internal cabinet volume 9.0 liters
Weight 7.5 kg (14.3lbs)
Dimensions 180 x 308 x 295 mm
7.0“ x 12.1”x 11.6”


DT6Aside
The DT-6A is a 6″ Active 2 way monitor w/ Active Crossover design (Per Unit)


DT-6A Features:

  • Active 2-Way Monitor System with complex Active Crossover design
  • The ideal solution for near-field monitoring in any recording or broadcasting facility
  • Designed for use in stereo as well as multichannel setups
  • Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
  • High, Mid and Low range contour control
  • High-Pass Filter – Flat, 60Hz & 80Hz selectable
  • Bi-Amped: 120W (LF), 60W(HF)
  • R-Type Transformer for super clean output
  • ICON Custom designed 6.5” woofer
  • Nomex® reinforced paper cone for crisp, clean and very open reproduction
  • Low loss SBR surround with low creep and long time reliability
  • Progressive spider to achieve soft clipping and low distortion even under extreme load
  • Heavy dual magnet ferrite magnet system with extended height for superb bass reproduction
  • Aluminum short circuiting ring and cupper cap in magnet system that practically eliminates motor distortion
  • Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
  • High-end 1” dome tweeter
  • Soft fabric dome and surround with wide-dispersion optimized geometry
  • Big surround to reduce distortion
  • Low loss ferrofluid-free magnet system for open and detailed sound
  • Heavy ferrite under hung dual magnet system for high sensitivity and low distortion
  • Extended and air-flow optimized back cavity to ensure low compression and low resonance frequency
  • Rugged die-cast aluminum faceplate with wide-dispersion optimized geometry
  • Robust and very rigid design
  • Diffraction optimized smooth front baffle design
  • Extended front baffle dimensions to eliminate any vibration or sound radiation from the enclosure
  • Premium absorbing material for long life high performance bass reproduction
  • Remote controlled Volume and Mute
  • High, Mid and Low range contour control
  • High-Pass Filter – Flat, 60Hz & 80Hz selectable
    • AirCon TM Wireless Controller Module fully integrated
  • LCD Display (Graphic type)
  • Connections:
    • XLR Outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 45 Hz – 25 kHz
Max SPL 2 m, pair in listening room (IEC Short Term) 113 dB peak
Bass Principle Bass reflex
Tuning Frequency 45 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 6.5″ Nomex paper cone
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.5 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 100dB SPL @ 500-2000 Hz avg @ 1 m 0 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR
LCD Graphic type, white backlit
User settings (on the rear panel)
Power 2 pos switch (On/Off)
Input sensitivity 20 pos encoder (0 dB to mute)
High Pass Control Digital switch (Flat / 60 Hz / 80 Hz)
Bass control Digital switch (-2 dB / 0 dB / +2 dB)
Midrange control Digital switch (-2 dB / 0 dB / +2 dB)
Treble control Digital switch (-2 dB / 0 dB / +2 dB)

Power consumption Idle: 15W / Max: 180W
Amplifier power Tweeter: 60W / Woofer: 120W
Internal cabinet volume 12.0 liters
Weight 12.0 kg (26.4lbs)
Dimensions (WxHxD) 208 x 334 x 322 mm
8.2” x 13.2”x 12.7”