Support Contact Us Legalese News & Newsletter Shop Online
2

PX Series

PX-Sub10A-3D
The PX-Sub10A – Active subwoofer with 10” long throw paper cone woofer. Balanced  XLR outputs, this sub has level control and is powered by 200W @8ohms amp module. Ideal for studio & professional applications.


PX-Sub10A Features:

  • 10” long throw, paper cone woofer
  • Phase adjustment in 0° / 180°
  • 29-200 Hz precise low-frequency reproduction
  • Balanced XLR outputs
  • Subwoofer level control
  • Adjustment of Crossover frequency ranges
  • Low frequency extension adjustment
  • Build-in 200 W @ 8 Ohms amp module
  • Ideal subwoofer system for studio & professional applications
  • Connections:
    • XLR outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Active subwoofer
Bass principle Bass reflex
Frequency reponse 30Hz to 200Hz
Inputs LFE/Slave: Balanced XLR connector
SAT/SUB:Right/Left full bandwidth, XLR
Input Impedance + branch: 20K Ohm
– branch: 10K Ohm
Sensitivity 75mV to 5V , adjustable
Max. input voltage 8 V
Outputs Slave: XLR connector
SAT/SUB:Right/Left, Highpass filtered, XLR & RCA
Output impedance 100 Ohm (each branch)
XLR Connector Pin 1: 0 / Pin 2 : + / Pin 3 : –
Mode selector LFE & Slave
Phase adjustment 0 / 180
High pass Flat / 60Hz / 80Hz
Low pass 50 Hz to 150 Hz
Power modes On / Auto
Amplifier power 120W, 4 Ohm
Woofer Cone:256mm / 10.0″, long throw, paper cone
Coil: 50mm / 2.0″ voice coil
Cabinet volume 29 liters
Power Consumption Standby: <5W Max:300W Weight 20 Kg (44.1lbs) Dimensions 360 x 330 x 450 mm 14.2” x 13.0” x 16.3” Main 120V, 50/60Hz 220V, 50/60Hz


PX-Sub350A
The PX-Sub350A – 350 watt low-frequency amplifier
– 29-200Hz precise low-frequency reproduction
– 10″ low-frequency driver with rubber surround
– Balanced XLR and unbalanced outputs
– Ideal subwoofer cabinet for professional applications


PX-Sub350A Features:

  • 350 watt low-frequency amplifier
  • 29-200Hz precise low-frequency reproduction
  • 10″ low-frequency driver with rubber surround
  • Balanced XLR and unbalanced outputs
  • Ideal subwoofer cabinet for professional applications
  • Connections:
    • Balanced XLR and unbalanced outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.

PXT8A-FRONT
The PX-T8A G2 – Compact high performance active studio monitor
– R-Type Transformer for super clean output
– Active 2-Way Monitor System with complex Active Crossover design
– High, Mid and Low range contour control
– High-Pass Filter – Flat, 60Hz & 80Hz selectable
– The ideal solution for near-field monitoring in any recording or broadcasting facility
– Designed for use in stereo as well as multichannel setups
– Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
– ICON’s “Vasorb TM” monitor stands are  included


PX-T8A2 Features:

  • Build-in Bi-Amp power module: 100W (LF), 30W(HF)
  • ICON 8″ polypropylene with paper dustcap
  • Low loss SBR surround with low creep and long time reliability
  • Progressive spider to achieve soft clipping and low distortion even under extreme load
  • Dual magnet ferrite magnet system with extended height for superb bass reproduction
  • Aluminum short circuiting ring
  • Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
  • High-end 1″ dome tweeter
  • Soft fabric dome and surround with wide-dispersion optimized geometry
  • Big surround to reduce distortion
  • Low loss ferrofluid-free magnet system for open and detailed sound
  • Diffraction optimized smooth front baffle design
  • Extended front baffle dimensions to eliminate any vibration or sound radiation from the enclosure
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 35 Hz – 21 kHz
Bass Principle Bass reflex
Tuning Frequency 35 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 8.5″ PPB cone with aluminum short circuiting ring and rigid aluminum basket
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.0 kHz
Cross over slope 18 dB/oct (LP and HP)
Input level for 86dB SPL @ 500-2000 Hz avg @ 1 m -15 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR/6.35mm TRS connectors
Unbalanced RCA connectors
Power consumption Idle: 10W / Max: 130W
Amplifier power Tweeter: 30W / Woofer: 100W
Internal cabinet volume 22.0 liters
Weight 14.0 kg (30.8lbs)
Dimensions (WxHxD) 255 x 415 x 348 mm
10.0“ x 16.3”x 13.7”