Support Contact Us Legalese News & Newsletter Shop Online
2

DT Series

DT5Afront
The DT-5A monitor is a 5″ Active 2 way monitor w/ Active Crossover design (Per Unit)


DT-5A Features:

  • Active 2-Way Monitor System with complex Active Crossover design
  • The ideal solution for near-field monitoring in any recording or broadcasting facility
  • Designed for use in stereo as well as multichannel setups
  • Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
  • High, Mid and Low range contour control
  • High-Pass Filter – Flat, 60Hz & 80Hz selectable
  • Bi-Amped: 80W (LF), 40W(HF)
  • R-Type Transformer for super clean output
  • ICON Custom designed 5.5” woofer
  • Nomex® reinforced paper cone for crisp, clean and very open reproduction
  • Low loss SBR surround with low creep and long time reliability
  • Progressive spider to achieve soft clipping and low distortion even under extreme load
  • Heavy dual magnet ferrite magnet system with extended height for superb bass reproduction
  • Aluminum short circuiting ring and cupper cap in magnet system that practically eliminates motor distortion
  • Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
  • High-end 1” dome tweeter
  • Soft fabric dome and surround with wide-dispersion optimized geometry
  • Big surround to reduce distortion
  • Low loss ferrofluid-free magnet system for open and detailed sound
  • Heavy ferrite under hung dual magnet system for high sensitivity and low distortion
  • Extended and air-flow optimized back cavity to ensure low compression and low resonance frequency%2
  • Connections:
    • XLR Outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 45 Hz – 25 kHz
Max SPL 2 m, pair in listening room (IEC Short Term) 110 dB peak
Bass Principle Bass reflex
Tuning Frequency 50 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 5.25″ Nomex paper cone
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.8 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 100dB SPL @ 500-2000 Hz avg @ 1 m 0 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR
LCD Graphic type, white backlit
User settings (on the rear panel)
Power 2 pos switch (On/Off)
Input sensitivity 20 pos encoder (0 dB to mute)
High Pass Control Digital switch (Flat / 60 Hz / 80 Hz)
Bass control Digital switch (-2 dB / 0 dB / +2 dB)
Midrange control Digital switch (-2 dB / 0 dB / +2 dB)
Treble control Digital switch (-2 dB / 0 dB / +2 dB)

Power consumption Idle: 10W / Max: 90W (per unit)
Amplifier power Tweeter: 30W / Woofer: 60W
Internal cabinet volume 9.0 liters
Weight 7.5 kg (14.3lbs)
Dimensions 180 x 308 x 295 mm
7.0“ x 12.1”x 11.6”


DT6Aside
The DT-6A is a 6″ Active 2 way monitor w/ Active Crossover design (Per Unit)


DT-6A Features:

  • Active 2-Way Monitor System with complex Active Crossover design
  • The ideal solution for near-field monitoring in any recording or broadcasting facility
  • Designed for use in stereo as well as multichannel setups
  • Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
  • High, Mid and Low range contour control
  • High-Pass Filter – Flat, 60Hz & 80Hz selectable
  • Bi-Amped: 120W (LF), 60W(HF)
  • R-Type Transformer for super clean output
  • ICON Custom designed 6.5” woofer
  • Nomex® reinforced paper cone for crisp, clean and very open reproduction
  • Low loss SBR surround with low creep and long time reliability
  • Progressive spider to achieve soft clipping and low distortion even under extreme load
  • Heavy dual magnet ferrite magnet system with extended height for superb bass reproduction
  • Aluminum short circuiting ring and cupper cap in magnet system that practically eliminates motor distortion
  • Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
  • High-end 1” dome tweeter
  • Soft fabric dome and surround with wide-dispersion optimized geometry
  • Big surround to reduce distortion
  • Low loss ferrofluid-free magnet system for open and detailed sound
  • Heavy ferrite under hung dual magnet system for high sensitivity and low distortion
  • Extended and air-flow optimized back cavity to ensure low compression and low resonance frequency
  • Rugged die-cast aluminum faceplate with wide-dispersion optimized geometry
  • Robust and very rigid design
  • Diffraction optimized smooth front baffle design
  • Extended front baffle dimensions to eliminate any vibration or sound radiation from the enclosure
  • Premium absorbing material for long life high performance bass reproduction
  • Remote controlled Volume and Mute
  • High, Mid and Low range contour control
  • High-Pass Filter – Flat, 60Hz & 80Hz selectable
    • AirCon TM Wireless Controller Module fully integrated
  • LCD Display (Graphic type)
  • Connections:
    • XLR Outputs
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: Provided
Supporting software and downloads available at http://support.icondigitalusa.com/.


System Two-way active nearfield monitor
Frequency Response (+/-3dB) 45 Hz – 25 kHz
Max SPL 2 m, pair in listening room (IEC Short Term) 113 dB peak
Bass Principle Bass reflex
Tuning Frequency 45 Hz
Tweeter 1″ wide dispersion silk dome
Woofer 6.5″ Nomex paper cone
Magnetically shielded/compensated Shielded and Compensated
Cross over frequency 2.5 kHz
Cross over slope 24 dB/oct (LP and HP)
Input level for 100dB SPL @ 500-2000 Hz avg @ 1 m 0 dBu RMS @ 0 dB level setting
Input connectors Balanced XLR
LCD Graphic type, white backlit
User settings (on the rear panel)
Power 2 pos switch (On/Off)
Input sensitivity 20 pos encoder (0 dB to mute)
High Pass Control Digital switch (Flat / 60 Hz / 80 Hz)
Bass control Digital switch (-2 dB / 0 dB / +2 dB)
Midrange control Digital switch (-2 dB / 0 dB / +2 dB)
Treble control Digital switch (-2 dB / 0 dB / +2 dB)

Power consumption Idle: 15W / Max: 180W
Amplifier power Tweeter: 60W / Woofer: 120W
Internal cabinet volume 12.0 liters
Weight 12.0 kg (26.4lbs)
Dimensions (WxHxD) 208 x 334 x 322 mm
8.2” x 13.2”x 12.7”