Support Contact Us Legalese News & Newsletter Shop Online
2

Audio Interfaces

Cube Series Interfaces

Cube-3D_0
The Cube is a 24 bit, 192kHz, 2-in/2-out USB recording audio interface. It has 2 analog inputs and 2 analog outputs through ¼” TRS connectors. The Cube has its master volume control on front panel, and one headphone out put with independent volume control. The Cube features an aluminum chassis, compact size for convenient desktop use, and is powered from the USB bus. The Cube is compatible with Mac OS X, Windows XP, Vista, Windows 7, and Windows 8.


Cube Features:

  • 24bit 96/192KHz 2-In/2-Out USB recording audio Interface
  • 2×2 analog line I/O full duplex recording and playback
  • 2 analog inputs and 2 analog outputs on 1/4″ TRS jacks
  • Master volume control on the front panel
  • 1 headphone output with individual volume control
  • USB2.0 High Speed equipped and USB bus-powered
  • Supports Direct sound, WDM and ASIO2.0
  • Compatible with Mac OSX (Intel CPU) and Windows XP, Vista (32bits), Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 2 1/4″ TRS analog inputs
    • 2 1/4″ TRS analog outputs
    • 1 headphone output with individual volume control
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Line Inputs 1/2(Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Input Level Unbalanced: +4dBV, typical
Maximum Input level Unbalanced: +11dBV, typical
Input Impedance 10K Ohms, typical
Line Outputs 1/2 (Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90 dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: 1 & 2 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


Cube Pro-3D_0
The Cube Pro is a 24 bit, 192kHz, 2-in/2-out USB recording audio interface. It features 4 analog inputs and 4 analog outputs through ¼” TRS connectors. Full duplex operation allows for simultaneous recording and playback on all four channels. The Cube has its master volume control on the front panel, and one headphone output with separate volume control. The Cube Pro has a durable Aluminum chassis, with compact styling for easy desktop use, and is completely USB bus-powered. The Cube Pro is compatible with Mac OS X, Windows XP, Vista, Windows 7, and Windows 8.


Cube Pro Features:

  • 24bit 96/192KHz 4-In/4-Out USB recording audio Interface
  • 4×4 analog line I/O full duplex recording and playback
  • 4 analog inputs and 4 analog outputs on 1/4″ TRS jacks
  • Master volume control on the front panel
  • 1 headphone output with individual volume control
  • Flexible channel routing via the software control panel
  • USB2.0 High Speed equipped and USB bus-powered
  • Supports Direct sound, WDM and ASIO2.0
  • Compatible with Mac OSX (Intel CPU) and Windows XP, Vista (32bits), Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 4 analog 1/4” TRS inputs
    • 4 analog 1/4” TRS outputs
    • 1 headphone output with individual volume control
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Line Inputs 1-4(Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Input Level Unbalanced: +4dBV, typical
Maximum Input level Unbalanced: +11dBV, typical
Input Impedance 10K Ohms, typical
Line Outputs 1-4 (Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: 1 & 2 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


cube mini-3d The Cube Mini is a tiny 24-bit, 192kHz, 2-in/2-out USB bus-powered audio interface. At around 9cm x 9cm (3.5”) this interface is an extremely compact and portable unit. The Cube Mini features 1 ¼” TRS Mic input and 1 guitar input, with 2 ¼” TRS line outputs. The Cube Mini features the same type of rugged aluminum chassis as our full-sized cubes, and is compatible with Mac OS X, Windows XP, Vista, Windows 7, and Windows 8.


Cube Mini Features:

  • Extremely compact size : around 9cm x 9cm
  • 24bit 96/192KHz 2-In/2-Out USB recording audio Interface
  • 2×2 analog I/O full duplex recording and playback
  • 1 Mic in with preamp for dynamic mic, switchable to Hi-Z in for guitar
  • 1 Hi-Z in for guitar
  • 2 line out on a stereo 1/4″ TRS jack
  • 1 headphone output on 1/4″ TRS jack
  • Supports Direct sound, WDM and ASIO2.0
  • Compatible with Mac OSX (Intel CPU) and Windows XP, Vista (32bits), Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 2 line out on a stereo 1/4″ TRS jack
    • 1 headphone output on 1/4″ TRS jack
    • 1 Mic in with preamp for dynamic mic, switchable to Hi-Z in for guitar
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Inst1/2 & Mic2 Inputs
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Input Impedance Inst in: 500K Ohms, typical
Mic in: 1.8K Ohms, typical
Total Gain Range +45dB
Line Outputs 1/2 (Stereo, Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: 1 & 2 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


Cube G-3D
The Cube G is a USB recording audio interface. It is a full-duplex 24-bit, 192kHz, 4-in/4-out interface, and is USB bus-powered for easy setup. The front panel features 1 ¼” TRS microphone input and 1 Hi-Z ¼” TRS input for guitars or instruments with a variety of level controls, and a headphone output with separate volume control. The back panel adds in two ¼” TRS line-level inputs and two matching ¼” TRS line outputs. The Cube G also features two RCA connections for S/PDIF input and output, as well as 5-pin MIDI input and output. The Cube G is compatible with Mac OS X, Windows XP, Vista, Windows 7, and Windows 8.


Cube-MG Features:

  • 24bit 96/192KHz 4-In/4-Out USB recording audio Interface
  • 2×2 analog I/O full duplex recording and playback
  • 1 Mic in with individual gain control
  • 1 Hi-Z in for guitar or bass with individual gain control
  • 2 analog outputs on 1/4″ TRS jacks
  • Master volume control on the front panel
  • 1 headphone output with individual volume control
  • S/PDIF I/O on RCA coaxial connectors
  • 1 x 1 16-channels MIDI I/O
  • Supports Direct sound, WDM and ASIO2.0
  • Compatible with Mac OSX (Intel CPU) and Windows XP, Vista (32bits), Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 1 1/4″ TRS Mic in with individual gain control
    • 1 1/4″ TRS Hi-Z in for guitar or bass with individual gain control
    • 1 1/4″ TRS headphone output with individual volume control
    • 2 analog inputs on 1/4″ TRS jacks
    • 2 analog outputs on 1/4″ TRS jacks
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Mic1 / Inst2 Inputs (at Minimum Gain)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Input Impedance Inst in: 500K Ohms, typical
Mic in: 1.8K Ohms, typical
Adjustable Gain +34dB
Total Gain Range +50dB
Line Inputs 1/2(Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level Unbalanced: +11dBV, typical
Input Impedance 10K Ohms, typical
Line Outputs 1/2 (Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90 dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


Cube 4Nano-3D_0
The Cube 4 Nano is a compact, 24-bit/192kHz, 2-input/2-output, USB 2.0 audio interface. It features two microphone or instrument preamps with XLR/¼” TRS combo jacks, switchable +48v phantom power, and individual gain controls. The Cube4Nano has two ¼” TRS line-level outputs, as well as an RCA pair for S/PDIF in and out. There are two 5-pin connectors for a full 16 channels of MIDI input and output. The front panel also features a master output volume control as well as a single stereo headphone output with independent volume control. The Cube4Nano is USB bus-powered, and is compatible with Mac OS X, Windows XP, Vista, Windows 7 and Windows 8.


Cube4Nano Features:

  • 24bit 96/192KHz 4-In/4-Out USB recording audio Interface
  • 2×2 analog line I/O full duplex recording and playback
  • Dual MIC/Instrument Preamps with gain controls
  • LED metering, Phantom power and gain
  • 2 analog outputs on 1/4” TRS jacks
  • S/PDIF I/O on RCA coaxial connectors
  • 1 x 1 – 16 channel MIDI I/O
  • Master volume control on the front panel
  • 1 headphone output with assignable source and individual volume control
  • Supports sampling rates from 44.1Hz to 192K Hz
  • Flexible channel routing via the software control panel
  • Supports Direct sound, WDM and ASIO2.0
  • Compatible with Mac OSX (Intel CPU) and Windows XP, Vista (32-bit), Windows 7 (32-bit/64-bit),Windows 8(32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • Dual MIC/Instrument Preamps with gain controls
    • 2 analog outputs on 1/4” TRS jacks
    • 2×2 analog line I/O full duplex recording and playback
    • 1 headphone output with assignable source and individual volume control 1/4″ TRS
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Mic1 / 2 Inputs (at Minimum Gain)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -87dB @ 1kHz
Input Impedance Inst in:500K Ohms, typical
Adjustable Gain +39dB
Total Gain Range +39dB
Line Outputs 1/2 (Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90 dB)
Crosstalk -87dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level: +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: 1 & 2 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


Cube DJ-3D_0
The Cube DJ is a specialized 24-bit/192kHz, 4-in/4-out USB 2.0 audio interface for DJs. The Cube DJ has two RCA stereo pair inputs and two RCA stereo pair outputs, as well as a selectable microphone input with preamp for voicing over the mix. The master volume control has a unique crossfader control which directs the stereo output between outputs 1/2 or outputs 3/4(with the center position allowing output on all 4 outputs). The Cube DJ also has a single stereo headphone output with independent control, and is USB bus-powered. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


Cube DJ Features:

  • 24bit 96/192KHz 4-In/4-Out USB recording audio Interface for DJ
  • 4×4 analog line I/O full duplex recording and playback
  • 4 analog inputs and 4 analog outputs on RCA jacks mic input on XLR connector with gain control
  • Individual “Line – Phono ” level switch for input 1 & 2
  • Mic in – Line1/2 in” switch for input 1&2
  • Horizontal cross fader for “Master” volume control for output 1/2 or 3/4.
  • Cross fader master volume control allow instant switching between output 1/2 or 3/4.
  • 1 headphone output with assignable source and individual volume control
  • Flexible channel routing via the software control panel
  • Supports Direct sound, WDM and ASIO2.0
  • Compatible with Mac OSX (Intel CPU) and Windows XP, Vista (32bits), Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Mic Inputs (at Minimum Gain)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -87dB @ 1kHz
Input Impedance Mic in: 1.8K Ohms, typical
Adjustable Gain +34dB
Total Gain Range +50dB
Line Inputs 1-4(Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -87dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level Unbalanced: +11dBV, typical
Input Impedance 10K Ohms, typical
Phono Inputs 1-4
Frequency Response 22Hz 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -87dB @ 1kHz
Nominal Output Level Unbalanced: -29dBV, typical
Maximum Output Level Unbalanced: -22dBV, typical
Input Impedance 47K Ohms, typical
Line Outputs 1-4 (Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Rati -102dB, A-weighted
THD+N <0.003% (-90 dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced:+4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: 1 & 2 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


CUBE DJ Mini-3D
The Cube DJ Mini is a miniature 24-bit, 192kHz, bus-powered USB 2.0 audio interface built with the DJ in mind. This compact but rugged interface has one ¼” dynamic microphone input with gain control, a stereo pair RCA master output, a stereo headphone output with its own volume control, and a large master output volume control on top. This interface is compatible with Mac OS X(up to 10.10) and Windows(up to 8.1).


Cube-DJ-Mini Features:

  • 24 Bit 96/192KHz 2-In/4-Out USB Recording Interface for DJ
  • 2×4 analog I/O full duplex recording and playback
  • 1 mic input (Ch.1 &2) on 1/4” connector with gain control
  • Master volume control on the top panel. (Ch.1 & 2)
  • 1 headphone output (Ch.3 & 4) with assignable source and individual volume control
  • Flexible channel routing via the software control panel
  • Supports DirectSound, WDM and ASIO2.0
  • Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit) , Windows 7 (32-bit/64-bit) & Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 2×4 analog I/O full duplex recording and playback
    • 1 mic input (Ch.1 &2) on 1/4” connector with gain control
    • 1 headphone output (Ch.3 & 4) with assignable source and individual volume control
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Mic Inputs
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Input Impedance 1.8K Ohms, typical
Total Gain Range +45dB
Line Outputs 1/2 (Stereo, Unbanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: 3 & 4 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


Satellite Series Interfaces

SATELLITE1008
The UMIX 1008 Satellite is a 10-input, 8-output, 24-bit / 192kbps USB 2.0 recording interface. This interface provides an audio input and output module designed to be installed into the QCon Pro controller.  It can also be used as a stand alone unit, and includes its own wall power supply and USB connections(only needed when not installed in the QCon Pro).

The Umix 1008 Satellite interface includes 8 XLR microphone inputs with high-quality preamps, selectable mic/instrument impedance matching, individual gain control, and switchable +48v phantom power. There are also 8 line-level ¼” TRS inputs, 8 line-level ¼” TRS outputs, one RCA input and output for a S/PDIF connection, and two 5-pin connectors for full 16-channel MIDI input and output. The Umix 1008 Satellite is compatible with Mac OS X(up to 10.10) using CoreAudio and ASIO, and Windows (up to 8.1) using the WDM and ASIO driver models.


Umix 1008 Satellite Features:

  • Use as a stand-alone unit or plug-in unit to Qcon series MIDI control surface.
  • 24-Bit 96/192KHz 10-In/8-Out USB Recording Interface
  • 8×6 analog I/O full duplex recording and playback
  • 8 x MIC/Instrument preamps with individual gain control and phantom power switch
  • 8 analog balanced inputs on 1/4” TRS jacks
  • 6 analog balanced outputs on 1/4” TRS jacks
  • S/PDIF I/O on RCA coaxial connectors
  • 1 x 1 – 16 channel MIDI I/O
  • 2 headphone outputs with assignable source and individual volume control
  • Flexible channel routing via the software control panel
  • USB2.0 High Speed equipped
  • Supports DirectSound, WDM and ASIO2.0
  • Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit) & Windows 7 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 8×6 analog I/O full duplex recording and playback
    • 8 x MIC/Instrument preamps with individual gain control and phantom power switch
    • 8 analog balanced inputs on 1/4” TRS jacks
    • 6 analog balanced outputs on 1/4” TRS jacks
    • 1 x 1 – 16 channel MIDI I/O
    • 2 headphone outputs with assignable source and individual volume control
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered
Supporting software and downloads available at http://support.icondigitalusa.com/.

Utack Satellite-Front_0
The Utrack Satellite is a 24-bit/192kHz, 2-in/2-out USB 2.0 audio interface. This interface is designed to be installed in specific Icon keyboard controllers – specifically the Logicon and Inspire series of keyboards – and provides audio input and output in addition to the MIDI controls. The Utrack Satellite features dual stereo headphone outputs with independent volume controls, two line-level ¼” TRS outputs, two line-level ¼” TRS inputs, one ¼” TRS switchable mic/instrument input with gain control, one ¼” TRS microphone input with preamp and gain control, and +48v phantom power. Power is supplied by the keyboard, so no additional external power supply is required. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


Utrack Satellite Features:

  • 24bit 192KHz 2-In/2-Out USB recording audio Interface
  • 2×2 analog I/O full duplex recording and playback
  • MIC input with +48V phantom power and gain control
  • Hi-Z input with gain control
  • 2 analog outputs on 1/4″ TRS jacks
  • 2 headphone outputs with volume control
  • Supports Direct sound, WDM and ASIO2.0
  • Compatible with Mac OSX (Intel CPU) and Windows XP, Vista (32bits), Windows 7 (32-bit/64-bit),Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • USB 2.0 truly high speed connectivity
  • Power supplied from ICON keyboard (No extra external power adapter needed)
  • Connections:
    • USB Mini-B – USB 2.0 Input
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Mic 1 / Inst 2 Input (at Minimum Gain)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB) Crosstalk -100dB @ 1kHz Input Impedance Inst in: 500K Ohms, typical Mic in: 1.8K Ohms, typical Adjustable Gain > 34dB
Total Gain Range +50dB
Line Inputs 1/2 (Unbalanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level Unbalanced: +11dBV, typical
Input Impedance 10K Ohms, typical
Line Outputs L/R (Unbalanced)
Frequency Response 22Hz 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90 dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level Unbalanced: +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Output 1 & 2 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


Utrack Satellite -Front
The Utrack Satellite Pro is a 24-bit/192kHz, 2-in/2-out, USB 2.0 Audio Interface. The Utrack Satellite Pro includes 1 XLR Mic-In with high quality preamp, switchable +48v phantom power, and adjustable gain. The front panel also features a Hi-Z instrument/guitar input and two line-level ¼” TRS outputs with fader level control. Low-level inputs can also be changed to line-level inputs, and there are two ¼” TRS inputs on the back panel as well. This interface provides two separate stereo ¼” TRS headphone outputs with fader volume control. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


Utrack Satellite Pro Features:

  • 24-Bit 96/192KHz 1 mic-In/1 guitar-In, 2-Out USB Recording Interface
  • 2 analoge line inputs on 1/4” TRS jacks
  • ICON innovative unique mic and guitar preamp with individual 60mm slider gain control and phantom power switch
  • 2 headphone outputs with assignable source and individual 60mm silder volume contro
  • Flexible channel routing via the software control panel
  • Supports Direc tSound, WDM and ASIO2.0
  • Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit), Windows 7 (32-bit/64-bit) & Windows 8 (32-bit/64-bit)
  • Robust aluminum and metal casing with Kensington lock port
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 2 analoge line inputs on 1/4” TRS jacks
    • 1 Mic-In / 1 Guitar-In, 2-Out
    • 2 headphone outputs with assignable source and individual 60mm silder volume control
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered
Supporting software and downloads available at http://support.icondigitalusa.com/.

UMix44-Satellite
The Umix 44 is a USB digital audio interface designed to fit into the UMix8 mixer. The Umix 44 features 24-bit/192kHz quality with mixer-integrated audio in and out. The Umix 44 takes advantage of the Umix 8 mixer’s architecture and provides input with level control from mixer channels 1 and 2, and provides two channels of output to the Main Out L/R channels. This interface adds two 5-pin connectors for a full 16 channels of MIDI input and output, and adds a pair of RCA connectors for S/PDIF input and output for easy connection to the modern digital studio. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


Umix 44 Features:

  • 24-Bit 96/192KHz 4-In/4-Out USB Recording Interface
  • 2×2 analog I/O full duplex recording and playback
  • Dual MIC/Instrument preamps with individual gain control and phantom
  • power switch on Umix 8’s Ch.1 & Ch.2
  • Input recording signal via Umix8’s unique design EQ, Comp circuit
  • Input gain level adjust by the Umix8’s Ch.1 and Ch.2 faders
  • 2 analog outputs on “Main Out L/R channels”
  • The output level is adjusted by the “Main Out L/R knob”
  • 1 headphone output with assignable source and individual volume control
  • S/PDIF I/O on RCA coaxial connectors
  • 1 x 1 – 16 channel MIDI I/O
  • USB2.0 High Speed equipped and USB bus-powered
  • Supports DirectSound, WDM and ASIO2.0
  • Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit) &
    Windows 7 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged aluminum construction
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • Dual MIC/Instrument preamps with individual gain control and phantom
    • 2 analog outputs on “Main Out L/R channels”
    • 1 headphone output with assignable source and individual volume control
    • 1 x 1 – 16 channel MIDI I/O
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Line Inputs (Unbanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Input Level Unbalanced: +4dBV, typical
Maximum Input level Unbalanced: +11dBV, typical
Input Impedance 10K Ohms, typical
Line Outputs (Unbanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm


UMix66 Satellite_0
The Umix 66 is a mixer-based 24-bit/192kHz, 6-in/6-out USB 2.0 recording interface. The Umix 66 interface integrates with the Umix 12 mixer and is powered directly from the USB bus. It provides 4 channels of input, controlled by mixer channels 1-4, as well as two stereo pair outputs via the mixer’s “Output 1/2″ and “Output 3/4″ channel controls. This add-on card also provides two 5-pin connections for a full 16 channels of MIDI input and output, as well as a pair of RCA connectors for S/PDIF in and out. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


Umix 66 Features:

  • 24-Bit 96/192KHz 6-In/6-Out USB Recording Interface
  • 4×4 analog I/O full duplex recording and playback
  • 4xMIC/Instrument preamps with individual gain control and phantom power switch on Umix12’s Ch.1-4
  • Input recording signal via Umix12’s unique design EQ, Comp circuit
  • Input gain level adjust by the Umix12’s Ch.1-4 faders
  • 4 analog outputs on “Output 1/2” & “Output 3/4” channels
  • The output level is adjusted by the “Output 1/2” & “Output 3/4” faders
  • 2xheadphone output with assignable source and individual volume control
  • S/PDIF I/O on RCA coaxial connectors
  • 1 x 1 – 16 channel MIDI I/O
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 4×4 analog I/O full duplex recording and playback
    • 4xMIC/Instrument preamps with individual gain control and phantom power switch on Umix12’s Ch.1-4
    • 4 analog outputs on “Output 1/2” & “Output 3/4” channels
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Line Inputs (Unbanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Input Level Unbalanced: +4dBV, typical
Maximum Input level Unbalanced: +11dBV, typical
Input Impedance 10K Ohms, typical
Line Outputs (Unbanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 102dB, A-weighted
Signal-to-Noise Ratio -102dB, A-weighted
THD+N <0.003% (-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm


U Series Interfaces

GuitarU-3D
The GuitarU is a rugged, compact, 24-Bit/192kHz, bus-powered USB 2.0 recording interface. The GuitarU features a pair of ¼” TRS line-level outputs on the back panel, and has a single instrument-level input with gain control on the front panel. The headphone output has independent gain control and fades between input and output sources, while the master output level is controlled by the large top knob. A special ruggedized rubber coating and durable aluminum construction make this a perfect interface for live or studio guitar recording on the go. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


GuitarU Features:

  • 24-Bit 96/192KHz 1 guitar-In/2-Out USB Recording Interface
  • 2×2 analog I/O full duplex recording and playback
  • ICON innovative unique guitar preamp with individual gain control.
  • 2 analog outputs on 1/4” TRS jacks
  • Master volume control on the top panel
  • 1 headphone output with assignable source and individual volume control
  • USB2.0 High Speed equipped and USB bus-powered
  • Supports DirectSound, WDM and ASIO2.0
  • Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit) ,Windows 7 (32-bit/64-bit) & Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged metal construction with rubber jacket
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 2×2 analog I/O full duplex recording and playback
    • 2 analog outputs on 1/4” TRS jacks
    • 1 headphone output with assignable source and individual volume control 1/4″ TRS jack
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Inst Input
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 93dB, A-weighted
Signal-to-Noise Ratio -93dB, A-weighted
THD+N <0.0061% (-90dB)
Crosstalk -87dB @ 1kHz
Input Impedance Inst in:500K Ohms, typical
Total Gain Range +38dB
Line Outputs 1/2 (Stereo, Unbanced)
Frequency Response 47Hz 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.003%(-90dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: 1 & 2 (at Maximum Volume; Into 100 Ohm load)
Frequency Response 47Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


MicU_3D
The MicU is a 24-Bit 96/192kHz, bus-powered, USB 2.0 recording interface. The MicU features a single XLR microphone input with preamp, gain control, and switchable +48v phantom power. It has a pair of ¼” TRS line-level outputs on the back panel, and a single stereo ¼” TRS headphone output with independent volume control. The master output level is controlled by the large top knob. A special ruggedized rubber coating and durable aluminum construction make this a perfect interface for live or studio guitar recording on the go. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


MicU Features:

  • 24-Bit 96/192KHz 1 mic-In/2-Out USB Recording Interface
  • 2×2 analog I/O full duplex recording and playback
  • ICON innovative unique mic preamp with individual gain control and phantom power switch
  • 2 analog outputs on 1/4” TRS jacks
  • Master volume control on the top panel
  • 1 headphone output with assignable source and individual volume control
  • Flexible channel routing via the software control panel
  • USB2.0 High Speed equipped and USB bus-powered
  • Supports DirectSound, WDM and ASIO2.0
  • Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit), Windows 7 (32-bit/64-bit) & Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged metal construction with rubber jacket
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 24-Bit 96/192KHz 1 mic-In/2-Out USB Recording Interface
    • 2×2 analog I/O full duplex recording and playback
    • ICON innovative unique mic preamp with individual gain control and phantom power switch
    • 2 analog outputs on 1/4” TRS jacks
    • 1 headphone output with assignable source and individual volume control
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Mic Input
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 93dB, A-weighted
Signal-to-Noise Ratio -93dB, A-weighted
THD+N <0.0061% (-90dB0)
Crosstalk -87dB @ 1kHz
Input Impedance:Mic in 1.8K Ohms, typical
Adjustable Gain +34dB
Total Gain Range +50dB
Line Outputs 1/2 (Stereo, Unbanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.003% (-90 dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms


MicU Solo 3D
The MicU Solo is a 24-Bit/192kHz, bus-powered, USB 2.0 recording interface. The MicU Solo features a single XLR/¼” TRS combo jack input for a microphone or guitar/instrument with gain control. The back panel features a pair of ¼” TRS line-level outputs, as well as a stereo ⅛”(3.5mm) TRS output for connecting to mobile speakers or standard headphones. A special ruggedized rubber coating and durable aluminum construction make this a perfect interface for live or studio guitar recording on the go. This interface is compatible with Mac OS X (up to 10.10) and Windows (up to 8.1).


MicU Solo Features:

  • 24-Bit 96/192KHz 1 mic & 1-guitar-In/2-Out USB Recording Interface
  • 2×2 analog I/O full duplex recording and playback
  • ICON innovative unique mic preamp with individual gain control and phantom power switch
  • 2 analog outputs on 1/4” TRS jacks
  • Master volume control on the top pane
  • 1 headphone output with assignable source and individual volume control
  • Flexible channel routing via the software control panel
  • USB2.0 High Speed equipped and USB bus-powered
  • Supports DirectSound, WDM and ASIO2.0
  • Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit) , Windows 7 (32-bit/64-bit) & Windows 8 (32-bit/64-bit)
  • Full duplex, simultaneous record/playback
  • Rugged metal construction with rubber jacket
  • Connections:
    • USB Mini-B – USB 2.0 Input
    • 2 analog outputs on 1/4” TRS jacks
    • Master volume control on the top pane
    • 1 headphone output with assignable source and individual volume control
  • Dimensions: L x W x H
  • Weight: 3.7 lbs (1.7 kg)
  • Power Supply: USB Bus-Powered

Supporting software and downloads available at http://support.icondigitalusa.com/.


Mic Input
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 93dB, A-weighted
Signal-to-Noise Ratio -93dB, A-weighted
THD+N <0.0061% (-90dB0)
Crosstalk -87dB @ 1kHz
Input Impedance:Mic in 1.8K Ohms, typical
Adjustable Gain +34dB
Total Gain Range +50dB
Line Outputs 1/2 (Stereo, Unbanced)
Frequency Response 22Hz to 22kHz (+/-0.1dB)
Dynamic Range 100dB, A-weighted
Signal-to-Noise Ratio -100dB, A-weighted
THD+N <0.003% (-90 dB)
Crosstalk -100dB @ 1kHz
Nominal Output Level Unbalanced: +4dBV, typical
Maximum Output Level +11dBV, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs: (at Maximum Volume; Into 100 Ohm load)
Frequency Response 22Hz to 22kHz (+/-1dB)
Power into Ohms 90 mW into 100 Ohms
THD+N <0.06% (-66dB)
Signal-to-Noise Ratio -90dB, A-weighted
Max Output Level into 100 Ohms +2.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms