Support Contact Us Legalese News & Newsletter Shop Online
2

Accessories

Covers and Cases

iCover-set
iCover – Looking for something to protect your iKey & iPad controllers? These light and robust aluminum covers slide right over the top of these i-Series controllers, protecting them during travel and everyday use! iCovers are available in black, royal blue, red, pink, and silver.


iCover Features:

  • Aluminum
  • Dimensions: 325mm(12.8”)x103mm(4.1”)x24mm(0.9”)
  • Weight: 144g / 0.3lbs
  • Supporting software and downloads available at http://support.icondigitalusa.com/.

    GearBox
    GearBox – This aluminum road case is great for transporting gear between the studio and classroom! This sturdy case is perfect for microphones, studio gear, and cables, and includes a locking latch with two keys. This case is included in the Studio In A Box bundle.


    Gear Box Features:

    Supporting software and downloads available at http://support.icondigitalusa.com/.

    Preamps & Power Supplies

    NeoAmp_Front
    NeoAmp – This 4 channel stereo headphone amp comes in a rugged aluminum chassis with large rubber feet for stability.  There is a single ¼” TRS stereo input, and four ¼” stereo outputs with independent volume control. The NeoAmp includes an AC adapter to power the amplifier, as well as an extended 3-year warranty.


    NeoAmp Features:

    • Four Channel Stereo headphone amplifier
    • Maximum Output power on each channel regardless of different headphone impedances
    • Four 1/4-inch stereo headphone outputs
    • Individual volume control for each headphone output
    • Stereo 1/4 inch input connector
    • Rugged aluminum extrusion chassis
    • Large rubber bumper feet
    • 18 Volt AC adapter included
    • Connections:
      • Stereo 1/4 inch input connector
      • Four 1/4-inch stereo headphone outputs
    Supporting software and downloads available at http://support.icondigitalusa.com/.


    Input
    Input impedance 100k ohm unbalanced
    Maximum input level +19 dBV
    Input connectors Stereo 1/4″ TRS connector
    Output
    Output connectors 4xStereo 1/4″ TRS female connectors
    Output impedance 100 ohm each output
    System
    Max gain 20 dB/Channel
    S/N Ratio > 90 dB
    THD < 0.05% IMD (SMPTE) < 0.05% General Power supply ICON AC18V/700mA power adapter Weight: 1.1kg (2.4lbs) Dimensions (WxDxH) 200 x 124 x 51 mm 7.9" x 4.9" x 2.0"


    ac-adapter
    Neuron Series Power Adapter – This product is an AC wall adapter designed for use with our Neuron series keyboard controllers. This adapter allows you to power and use the keyboard without need for a computer or USB connection.


    Neuron Power Adapter Features:

    • AC Power adapter for all Neuron series keyboards.
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    MIDI Interfaces

    Icon’s Midi Interfaces are equipped with a USB 2.0 connection, featuring Plug & Play compatibility with any Operating System or computer device supporting class-compliant USB MIDI devices.

    Cube Mi3-3D
    The Cube MI-3 midi interface has 3 5-pin inputs, and 3 5-pin outputs for a total of 48 channels of MIDI input and output. The Cube MI-3 is USB bus-powered for portability and ease of connection.


    Cube MI-3 Features:

    • 3-in / 3-out MIDI interface (48×48 MIDI channels)
    • Supports multiple platforms with MultiPlatTM driver (Windows only)
    • MultiPlatTM driver available for 32-bit and 64-bit Windows platforms
    • USB 2.0 for high-speed connection
    • Plug & play for Mac and Window platforms
    • Class-compliant with Windows XP, Vista (32-bit), Windows 7 (32-bit/64-bit) and Mac OS X
    • No IRQ, I/O address or DMA channel setup
    • Perfect MIDI timing
    • MIDI-in and MIDI-out activity indicators for each port
    • USB bus powered, no external power supply required
    • Connections:
      • USB Mini-B – USB 2.0 Input
      • 3-in / 3-out MIDI interface (48×48 MIDI channels)
    Supporting software and downloads available at http://support.icondigitalusa.com/.


    Connector USB USB 2.0 connector (standard type)
    MIDI Inputs 3 x Din 5 female MIDI connectors
    MIDI Outputs 3 x Din 5 female MIDI connectors
    Signal Indicator USB signal 1 x White color LEDs
    MIDI Inputs 3 x Green color LEDs
    MIDI Outputs 3 x Red color LEDs
    Power supply USB bus-powered
    Current consumption 100mA or less
    Weight 0.88kg (1.9lbs)
    Dimensions 165 x 165 x 50 mm
    6.5” x 6.5” x 2.0”


    Cube Mi5-3D
    The Cube MI-5 interface features 5 separate 5-pin input/output pairs for a total of 80 channels of MIDI communication. The Cube MI-5 is USB bus-powered for connecting your classic MIDI gear on the go.


    Cube MI-5 Features:

    • 5-in / 5-out MIDI interface (80×80 MIDI channels)
    • Supports multiple platforms with MultiPlatTM driver (Windows only)
    • MultiPlatTM driver available for 32-bit and 64-bit Windows platforms
    • USB 2.0 for high-speed connection
    • Plug & play for Mac and Window platforms
    • Class-compliant with Windows XP, Vista (32-bit), Windows 7 (32-bit/64-bit) and Mac OS X
    • No IRQ, I/O address or DMA channel setup
    • Perfect MIDI timing
    • MIDI-in and MIDI-out activity indicators for each port
    • USB bus powered, no external power supply required
    • Connections:
      • USB Mini-B – USB 2.0 Input
      • 5-in / 5-out MIDI interface (80×80 MIDI channels)
    Supporting software and downloads available at http://support.icondigitalusa.com/.


    Connector USB USB 2.0 connector (standard type)
    MIDI Inputs 5 x Din 5 female MIDI connectors
    MIDI Outputs 5 x Din 5 female MIDI connectors
    Signal Indicator USB signal 1 x White color LEDs
    MIDI Inputs 5 x Green color LEDs
    MIDI Outputs 5 x Red color LEDs
    Power supply USB bus-powered
    Current consumption 100mA or less
    Weight 0.94kg (2.1lbs)
    Dimensions 165 x 165 x 50 mm
    6.5” x 6.5” x 2.0”


    Stands and Filters

    SB-100set_0
    Icon’s SB-100 Monitor Stands are universal monitor stands for monitors 5.5” or below, and support speakers weighing up to 66 lbs. This robust stand has 4 adjustable mounting points, which are a perfect fit for ICON “Vasorb” rubber isolation pads(included with Icon monitors). The stand has an adjustable height, as well as adjustable fine-point isolating feet for the base of the stand.


    SB-100 Features:

    • Universal monitor stand, suitable for 5.5” or below monitor speaker
    • Extremely stable and robust
    • 4 adjustable fixtures fit perfectly with ICON “Vasorb ™” monitor rubber stands
    • ICON difference model of monitors size are labeled for easy installation
      • Top metal plate area: 230(W) x 320(D) mm / 9.1“(W) x 12.6“(D)
      • Top metal plate thickness: 3.5mm / 0.14”
      • “VasorbTM” adjustable width: From 160mm(6.3”) to 210mm(8.3”)
      • Suggested loading limit: Up to 30kg / 66lbs
      • Adjustable height: From 0.7m (2.3ft.) to 1.1m (3.6ft.)
      • Base dimensions: 460 x 460 mm / 18.1” x 18.1”
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    SB-200set
    SB-200 Monitor Stands are universal monitor stands for monitors of 6.5” or below, and support up to 66 lbs each. This durable stand has 4 adjustable mounting points, which are perfect for ICON “Vasorb” rubber isolation pads(included with Icon monitors). The stand has an adjustable height, as well as adjustable fine-point isolating feet for the base of the stand.


    SB-200 Features:

    • Universal monitor stand, suitable for 6.5” or above monitor speaker
    • Extremely stable and robust
    • 4 adjustable fixtures fit perfectly with ICON “Vasorb ™” monitor rubber stands
    • ICON difference model of monitors size are labeled for easy installation
      • Top metal plate area: 330(W) x 385(D) mm / 13“(W) x 15.2“(D)
      • Top metal plate thickness: 3.5mm / 0.14”
      • “VasorbTM” adjustable width: From 200mm(7.9”) to 310mm(12.2”)
      • Suggested loading limit: Up to 30kg / 66lbs
      • Adjustable height: From 0.7m (2.3ft.) to 1.1m (3.6ft.)
      • Base dimensions: 460 x 460 mm / 18.1” x 18.1”
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    Microphone Stands

    MB-01
    The MB-01 lightweight boom mic stand is a height-adjustable tripod mic stand with a sleek black finish. The stand features heavy-duty die-cast steel construction, and comes with cable holder clips and a standard microphone clip.


    MB-01 Features:

    • Height adjustable mic stand comes with a durable tripod base and foldable legs for easy storage
    • Heavy duty and robust
    • Die-cast and steel construction
    • Clip-on cable holder included
    • Sleek black finish
      • Mic boom arm length: 780mm / 31”
      • Adjustable height: 1030mm (41”) to 1930mm (76”)
      • Tube diameter: 20mm / 0.8”
      • Base type: Tripod
      • Tripod length: 340mm (13.4”)/each x 3
      • Weight: 2.17kg / 4.8lbs
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    mb-02
    The MB-02 tabletop microphone stand is a small, lightweight, portable microphone stand perfect for tabletop recording. This stand has a heavy metal base for improved stability, along with adjustable height and an included standard microphone clip.


    MB-02 Features:

    • Adjustable height from 21cm to 28cm
    • Die-cast and steel construction
    • Robust and heavy duty
    • Sleek black finish
    • Mic clip included
    • Ideal for Pod-casting
      • Adjustable height:
        230mm (9.1”) to 330mm (13”)
      • Tube diameter:
        19mm / 0.7”
      • Base type:
        Round weighted base
      • Base size:
        128mm (5”) diameter
      • Weight:
        0.74kg / 1.65lbs
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    MB04
    The MB-04 lightweight boom mic Stand is an ultra light tripod boom stand. The durable tripod base folds for easy storage, and the stand includes a cable clip and standard microphone clip. The MB-04 is available in a sleek black finish.


    MB-04 Features:

    • Height adjustable mic stand comes with a durable tripod base and foldable legs for easy storage
    • Light-weight construction for easy carry
    • Clip-on cable holder included
    • Sleek black finish
      • Mic boom arm length:
        730mm / 28.7”
      • Adjustable height:
        850mm (33.5”) to 1470mm (57.9”)
      • Tube diameter:
        20mm / 0.8”
      • Base type:
        Tripod
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    MB05
    The MB-05 tabletop mic stand with flexible neck is a durable and versatile mic stand. The MB-05 comes with a heavy base for added stability, an adjustable gooseneck, and adjustable height. It has a sleek black and silver finish, includes a standard microphone clip, and its size and flexible positioning make it perfect for podcasting.


    MB-05 Features:

    • Adjustable height from 240mm to 400mm
    • 157mm flexible neck included
    • Die-cast and steel construction
    • Robust and heavy duty
    • Sleek black finish
    • Mic clip included
    • Ideal for Pod-casting
      • Adjustable height:
        240mm (9.4”) to 400mm (15.7”)
      • Flexible neck length:
        157mm / 6.2”
      • Tube diameter:
        19mm / 0.7”
      • Base type:
        Round weighted base
      • Base size:
        128mm (5”) diameter
      • Weight:
        0.84kg / 1.8lbs
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    MB-06
    The MB-06 desk-mount scissor-style microphone stand is a solid and easy to position microphone stand. Perfect for internet broadcasting, recording studios, and multimedia workstations, the MB-06 has a convenient screw-on clamp mounting system for a large variety of desks and tables. The stand comes in a sleek black finish, and can position a microphone up to 23.5″ from the base. Supports microphones up to 3 lbs.


    MB-06 Features:

    • Solid and easy to handle microphone desk arm
    • Height adjustable to 23.5″
    • Perfect for studios and multi-media workstations
    • Die-cast & steel construction
    • Sleek black finish
    • 2 1/8″ adjustable screw-on clamp included

    Supporting software and downloads available at http://support.icondigitalusa.com/.

    DSCN0005
    The SM-02 shock mount for condenser mics works with many large-diaphragm studio condenser microphones. This shock mount is compatible with the Icon U1, M2, M3, O2, and O3 microphones, and features a hinged 5/8″ threaded microphone mount point. The SM-02 includes one replacement elastic band.


    SM-02 Features:

    • Shock mount for large diaphragm studio condenser microphone
    • Compatible with M3, M2, O3 and O2
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    RF01-Front (1)
    The RF-01 is a portable, mobile vocal isolation booth. It features a height-adjustable (90cm – 150cm) tripod stand base, with integrated microphone stand and an adjustable mount for the foam reflection filter. The RF-01 is extremely easy to install, provides results similar to a professional vocal booth, and is great for every type of recording musician. The RF-01 also features easily removable filter foam, with replacement foam available for purchase soon.


    RF-01 Features:

    • Changeable foam for replacement
    • Individual replacement form available for purchase
    • Metal stand is included (install and ready to use from the box)
    • Stable construction and design even heavy microphone is installed
    • Light weight for portable use
    • Extremely easy to install
    • Adjustable height from 90cm-150cm (app. measured from ground to microphone position)
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    PF-01 (1)
    The PF-01 microphone pop filter is an extra large, double-layer acoustic pop filter. The PF-01 is mounted with an adjustable clamp to fit any microphone stand or recording desk. It has a flexible gooseneck for perfect positioning.


    PF-01 Features:

    • High efficiency double-layer acoustic pop filter
    • Adjustable clamp for any microphone stand
    • Flexible gooseneck for precise positioning
    • Extra large pop filter
    Supporting software and downloads available at http://support.icondigitalusa.com/.

    icable
    The iPC-01 iPad-compatible cable allows you to connect USB bus-powered devices to the Apple iPad or other low-power host device by splitting the power and data into two separate connectors. This allows you to plug the data connection into an iPad or similar device(which may require the Apple Camera Connection Kit to provide a USB port, not included) while powering the device from another USB source or charger port. The iPC-01 has a male USB Mini-B connector to plug into any of our i-Series controllers, and two male USB-A plugs – one for power, one for data.


    iPC-01 Features:

    • Cable to connect iSeries products to an Apple iPad.
    • Dual USB-A plugs(one for data, one for power) to a single Mini-B USB connector. Provides power from one USB source and data from another.
    Supporting software and downloads available at http://support.icondigitalusa.com/.